# E3D Titan / V6 Mount **URL:** \ **Category:** Original (3-in-1)\ **Created:** [July 6, 2018, 3:47am UTC](https://forum.snapmaker.com/t/e3d-titan-v6-mount/3083 "2018-07-06T03:47:37Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Valen](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@Valen](https://forum.snapmaker.com/u/Valen)\ **Post date:** [July 8, 2018, 6:15pm UTC](https://forum.snapmaker.com/t/e3d-titan-v6-mount/3083/3 "2018-07-08T18:15:44Z")
> [@Flexible Filament adapter is needed](http://forum.snapmaker.com/t/flexible-filament-adapter-is-needed/1787): > > it is nearly impossible to print flexible filament such as TPU with the default hardware. I have made an adapter that makes it easier. If this piece was incorporated into the heat sink inside the 3d module i think it would be a nice improvement to the filament feed. If they so desire the snapmaker team is free to use the piece I designed however they wish. Link: [https://www.shapeways.com/product/GWK9XQFS7/flexible-filament-adapter-for-snapmaker](https://www.shapeways.com/product/GWK9XQFS7/flexible-filament-adapter-for-snapmaker) My Settings for printing TPU are: Layer height: … Works like a charm. I ordered it from shapeways bronze/steel. Printing Shore 95A and 82A without problem. Using just 20mm/s though. --- _[View the full topic](https://forum.snapmaker.com/t/e3d-titan-v6-mount/3083)._