# Dual extruder upgrade has started shipping **URL:** \ **Category:** Artisan (3-in-1)\ **Created:** [August 25, 2023, 5:54am UTC](https://forum.snapmaker.com/t/dual-extruder-upgrade-has-started-shipping/32658 "2023-08-25T05:54:31Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [August 25, 2023, 6:11am UTC](https://forum.snapmaker.com/t/dual-extruder-upgrade-has-started-shipping/32658/2 "2023-08-25T06:11:31Z")
Here you go for the correct conversation, i got mine some time ago and it work pretty well. > [@Front Cover STL File & Replacement Kit Update (Dual Extrusion Module)](https://forum.snapmaker.com/t/front-cover-stl-file-replacement-kit-update-dual-extrusion-module/31701): > > UPDATE: 2023-08-22 Wiki Links Update [Replacement kit instructions](https://wiki.snapmaker.com/en/general/troubleshooting/relacement_kit_for_artisan_and_dual_extrusion_module)[Replacing the filament runout sensor](https://wiki.snapmaker.com/en/general/troubleshooting/replace_filament_runout_sensor_of_dual_extrusion_module)[Replacing the front cover](https://wiki.snapmaker.com/en/general/troubleshooting/replace_front_cover_of_dual_extrusion_module)[Installing the silicone buckle wedge](https://wiki.snapmaker.com/general/troubleshooting/install_buckle_wedge_of_dual_extrusion_module)[Installing the silicone bed shim](https://wiki.snapmaker.com/snapmaker_artisan/troubleshooting/install_silicone_bed_shim) UPDATE: 2023-07-31 Wiki links [Expired]: UPDATE: 2023-07-27 We are excited to tell you that the replacement kit is now available! Since our last update, we have been overwhelmed by the feedback, and we want to express our gratitude for your enthusiasm and trust in us. We have c… --- _[View the full topic](https://forum.snapmaker.com/t/dual-extruder-upgrade-has-started-shipping/32658)._