# Dual extruder can't be feed with filament without removing tubes

**URL:** <https://forum.snapmaker.com/t/dual-extruder-cant-be-feed-with-filament-without-removing-tubes/39589>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Tags:** Dual-extruder\
**Created:** [June 27, 2025, 3:08am UTC](https://forum.snapmaker.com/t/dual-extruder-cant-be-feed-with-filament-without-removing-tubes/39589 "2025-06-27T03:08:00Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![rbremmer1770](https://avatars.discourse-cdn.com/v4/letter/r/7cd45c/32.png) [@rbremmer1770](https://forum.snapmaker.com/u/rbremmer1770)\
**Post date:** [July 16, 2025, 5:38pm UTC](https://forum.snapmaker.com/t/dual-extruder-cant-be-feed-with-filament-without-removing-tubes/39589/7 "2025-07-16T17:38:58Z")

</div>

Where did you locate the opening on the top? Left side of my enclosure is against a wall. I’m considering swapping the left side and top panels to relocate the entry hole.

---

_[View the full topic](https://forum.snapmaker.com/t/dual-extruder-cant-be-feed-with-filament-without-removing-tubes/39589)._