# Dual Extruder (A350) won't do \*anything\* when trying to load?

**URL:** <https://forum.snapmaker.com/t/dual-extruder-a350-wont-do-anything-when-trying-to-load/41418>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [March 9, 2026, 3:43pm UTC](https://forum.snapmaker.com/t/dual-extruder-a350-wont-do-anything-when-trying-to-load/41418 "2026-03-09T15:43:27Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [March 9, 2026, 7:16pm UTC](https://forum.snapmaker.com/t/dual-extruder-a350-wont-do-anything-when-trying-to-load/41418/3 "2026-03-09T19:16:10Z")

</div>

Seems your controller has a bad toolhead port.  
This could be a workaround:

> [@Filament gears not moving](https://forum.snapmaker.com/t/filament-gears-not-moving/36688/2):
>
> Try to reroot the toolheadport with M1029, have a look here: [https://snapmaker.github.io/Documentation/gcode/M1029](https://snapmaker.github.io/Documentation/gcode/M1029) Unfortunately it seems you will need a new controller…

---

_[View the full topic](https://forum.snapmaker.com/t/dual-extruder-a350-wont-do-anything-when-trying-to-load/41418)._
