# Download section: Luban and new Fusion configuration for Original?

**URL:** <https://forum.snapmaker.com/t/download-section-luban-and-new-fusion-configuration-for-original/6419>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [May 1, 2020, 4:16pm UTC](https://forum.snapmaker.com/t/download-section-luban-and-new-fusion-configuration-for-original/6419 "2020-05-01T16:16:33Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [May 1, 2020, 9:52pm UTC](https://forum.snapmaker.com/t/download-section-luban-and-new-fusion-configuration-for-original/6419/4 "2020-05-01T21:52:16Z")

</div>

Luban does support v1 and v2 hardware. It’s just less work for them to maintain one code base than two. From what I’ve read on the forums, Luban is mostly just a rebranding of SnapmakerJS anyway.

You can still download [SnapmakerJS from the forum](https://forum.snapmaker.com/t/snapmakerjs-downloads-and-updates/158). At least, I was able to download the latest version. I didn’t try older versions. You can probably find Snapmaker3D in the forums if you really want to.

---

_[View the full topic](https://forum.snapmaker.com/t/download-section-luban-and-new-fusion-configuration-for-original/6419)._