# Don't buy a snapmaker it is of poor quality **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [January 27, 2025, 8:35pm UTC](https://forum.snapmaker.com/t/dont-buy-a-snapmaker-it-is-of-poor-quality/38854 "2025-01-27T20:35:04Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![noviceiii](https://avatars.discourse-cdn.com/v4/letter/n/e19adc/32.png) [@noviceiii](https://forum.snapmaker.com/u/noviceiii)\ **Post date:** [January 28, 2025, 4:32pm UTC](https://forum.snapmaker.com/t/dont-buy-a-snapmaker-it-is-of-poor-quality/38854/8 "2025-01-28T16:32:25Z")
> Blockquote > For me this was the main point. You are not using your machine with the necessary care. The machine is in good hands. Has plenty of space, a solid standing, room temperature, dry, no direct sunlight and hasen’t been moved or touched (beside filament change) sinse September 2022. The controller stopped working mid printing. > Blockquote > After the warranty period, they make a lot possible via support. So even individual parts that you can’t officially buy are often available on request for a reasonable price. I have made that good experience. Altough I had wished to have to parts working a bit longer than a few months after the waranty period. > Blockquote > Snapmaker could really do something about cable management, but only because it is chaotic and invites errors in assembly and less because it doesn’t do its job. Voila… > Blockquote > All in all, I can’t agree with the points. You don’t have to agree! And I once was a very pro too. See here: [Humble improvement ideas F350 (3D Print) - Snapmaker 2.0 - Snapmaker: where creation happens](https://forum.snapmaker.com/t/humble-improvement-ideas-f350-3d-print/27534/4) But however, this isn’t a post about the good things: it is about my machine that obviously never was of strong health. --- _[View the full topic](https://forum.snapmaker.com/t/dont-buy-a-snapmaker-it-is-of-poor-quality/38854)._