# Does anyone use bondtech cht nozzle **URL:** \ **Category:** J1/J1s IDEX\ **Created:** [January 14, 2025, 7:53pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742 "2025-01-14T19:53:23Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![jbot](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jbot/32/28468_2.png) [@jbot](https://forum.snapmaker.com/u/jbot)\ **Post date:** [January 14, 2025, 7:53pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/1 "2025-01-14T19:53:23Z")
i have been thinking to increase heat performance with a nozzle upgrade for faster prints. any experience you have with relevant upgrades is welcome ---
**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\ **Post date:** [January 14, 2025, 10:40pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/2 "2025-01-14T22:40:40Z")
I used the Bondtech CHT MK8 Coated Brass Nozzles when I modified the standard Snapmaker hotend to be all metal. Didn’t notice a massive difference but also wasn’t pushing limits with flow. For the all metal mod, I also got an MK8 bimetal heatbreak, and the CNC Kitchen Volcano Adapter. At the time the Volcano adapter was v2. Now they have v3, but I dunno which of the two lengths is better off the top of my head. ---
**Author:** ![Miles](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/miles/32/20805_2.png) [@Miles](https://forum.snapmaker.com/u/Miles)\ **Post date:** [January 15, 2025, 2:06am UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/3 "2025-01-15T02:06:26Z")
revo works great on my setup, havent gotten a high-flow revo yet but it would be fun to try ---
**Author:** ![jbot](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jbot/32/28468_2.png) [@jbot](https://forum.snapmaker.com/u/jbot)\ **Post date:** [January 16, 2025, 12:46pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/4 "2025-01-16T12:46:31Z")
ah v cool. did you make a post about this all metal upgrade ---
**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\ **Post date:** [January 16, 2025, 3:53pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/5 "2025-01-16T15:53:10Z")
There’s a long thread of people discussing options here, though my specific one I didn’t post: > [@Findings and solution for the Snapmaker J1 clogging problem](https://forum.snapmaker.com/t/findings-and-solution-for-the-snapmaker-j1-clogging-problem/30472): > > Hello all, this is a joint project by: @Mechanikus@MrBean@i3sven and the kind support of the Snapmaker J1 team. Today we present you, our findings and solution against the clogging problem on the J1. In this document you will find everything that leads to the problem and what it takes to solve it. [Document PDF](https://www.transfernow.net/dl/20230324P2lkCnAV), and converted here for viewing in the forum. We thus hope to be able to offer everyone a solution. ---
**Author:** ![Wombley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/wombley/32/27838_2.png) [@Wombley](https://forum.snapmaker.com/u/Wombley)\ **Post date:** [January 16, 2025, 11:03pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/6 "2025-01-16T23:03:48Z")
To clarify, although it’s detailed in that thread, the CNC Kitchen adapter basically acts as a threaded spacer for the top of the heatbreak if you use a different one that’s too short to fill it. Makes more sense when you see the cross section. ---
**Author:** ![jbot](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jbot/32/28468_2.png) [@jbot](https://forum.snapmaker.com/u/jbot)\ **Post date:** [January 17, 2025, 9:53pm UTC](https://forum.snapmaker.com/t/does-anyone-use-bondtech-cht-nozzle/38742/7 "2025-01-17T21:53:01Z")
awesome. thanks.