# Do Snapmaker 2.0 Devices Have a Webpage?

**URL:** <https://forum.snapmaker.com/t/do-snapmaker-2-0-devices-have-a-webpage/5455>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 27, 2020, 10:34pm UTC](https://forum.snapmaker.com/t/do-snapmaker-2-0-devices-have-a-webpage/5455 "2020-02-27T22:34:12Z")\
**Posts on this page:** 1\
**Showing post:** 29

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [September 22, 2023, 1:36pm UTC](https://forum.snapmaker.com/t/do-snapmaker-2-0-devices-have-a-webpage/5455/29 "2023-09-22T13:36:42Z")

</div>

You will need the token for connect as well, and status there’s usually some form of timestamp at the end as well (or random string of numbers, I really don’t know). You could try some of my batch files found here;

> [@Guide: Automatic Start via Drag/Drop](https://forum.snapmaker.com/t/guide-automatic-start-via-drag-drop/29177):
>
> This is the “wireless” portion to round out my full Lightburn control guide, found here: Since my main snapmaker (pretty much stays setup with the 10W + Enclosure) is far away from my PC, using a cable + Lightburn isn’t an option. I usually just used Luban to start files. However, as many of you know, their software is slow and iffy, so why not bypass it? Note: Be sure to read all the edits at the end of the post for more info. There’s a few pre-requisites and I’m setting this up on a windo…

Try the “SendCode” from post 4, replace your IP/Token, run the .bat, and try sending `G28` to home the machine.

---

_[View the full topic](https://forum.snapmaker.com/t/do-snapmaker-2-0-devices-have-a-webpage/5455)._
