# DIY Rotary Attachment

**URL:** <https://forum.snapmaker.com/t/diy-rotary-attachment/16252>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 24, 2021, 6:15pm UTC](https://forum.snapmaker.com/t/diy-rotary-attachment/16252 "2021-02-24T18:15:49Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [February 27, 2021, 3:37pm UTC](https://forum.snapmaker.com/t/diy-rotary-attachment/16252/15 "2021-02-27T15:37:13Z")

</div>

Its DIY so think about and make it 😉  
Here is a older thread for the original:

> [@Laser engraving on cylinder e.g.water bottle](https://forum.snapmaker.com/t/laser-engraving-on-cylinder-e-g-water-bottle/4708):
>
> A metal water bottle makes for a nice gift and even better if you can custom engrave something on it To get around the problem of engraving on a curved surface i had look at the Rotary attachment from mwhatch - [https://www.thingiverse.com/thing:2784777](https://www.thingiverse.com/thing:2784777) - but then made something simpler to print. For those interested have a look at and for a video of it working see

---

_[View the full topic](https://forum.snapmaker.com/t/diy-rotary-attachment/16252)._