# Dialing in new fillament

**URL:** <https://forum.snapmaker.com/t/dialing-in-new-fillament/25702>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [May 6, 2022, 1:19pm UTC](https://forum.snapmaker.com/t/dialing-in-new-fillament/25702 "2022-05-06T13:19:28Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![ElloryJaye](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/elloryjaye/32/13979_2.png) [@ElloryJaye](https://forum.snapmaker.com/u/ElloryJaye)\
**Post date:** [May 6, 2022, 4:59pm UTC](https://forum.snapmaker.com/t/dialing-in-new-fillament/25702/4 "2022-05-06T16:59:21Z")

</div>

As far as I know, to do an 11x11, you’ll need to attach a computer to the USB-mini-B port on the Snapmaker controller and run the gcode directly. The last post in [Calibration madness - #9 by scyto](https://forum.snapmaker.com/t/calibration-madness/5704/9) lists the gcode to run. (Also, the autolevel is 3x3, not 5x5. I guess I haven’t done it in so long that I forgot.)

---

_[View the full topic](https://forum.snapmaker.com/t/dialing-in-new-fillament/25702)._