# Cutting Foamcore

**URL:** <https://forum.snapmaker.com/t/cutting-foamcore/17068>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [March 18, 2021, 2:02am UTC](https://forum.snapmaker.com/t/cutting-foamcore/17068 "2021-03-18T02:02:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![CyberCJ](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@CyberCJ](https://forum.snapmaker.com/u/CyberCJ)\
**Post date:** [March 18, 2021, 2:02am UTC](https://forum.snapmaker.com/t/cutting-foamcore/17068/1 "2021-03-18T02:02:14Z")

</div>

Hi.  
I have a Snapmaker 2.0 A350. I’d like to cut out shapes using .3/16 in foamcore. I know about the off-gassing and I have adequate ventilation. I appreciate your concern. This is a function I have frequently performed using large commercial laser engraver. I was wondering if anyone has tried it on their Snapmaker 2.0 and, if so, what settings were used.

I’d consider CNC cutting the foamcore, but I didn’t think it would cut cleanly. Has anyone tried it?

Thank you,
