# Cura support temperature is not right

**URL:** https://forum.snapmaker.com/t/cura-support-temperature-is-not-right/33341
**Category:** Showcase & Prints
**Created:** [October 24, 2023, 9:51am UTC](https://forum.snapmaker.com/t/cura-support-temperature-is-not-right/33341 "2023-10-24T09:51:28Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![joost03](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@joost03](https://forum.snapmaker.com/u/joost03)
#### Post date: [October 24, 2023, 9:51am UTC](https://forum.snapmaker.com/t/cura-support-temperature-is-not-right/33341/1 "2023-10-24T09:51:29Z")

</div>

I’m trying to print something with PETG and PVA support. I have the Snapmaker plugin in Cura and have PVA selected as my support I also selected the right nozzle as support I set the temperature for my left nozzle to 230 for PETG and my right nozzle to 215 for PVA but when I start the print the right nozzle goes to 230 which is way too hot for PVA. Does anyone know a solution?

---

<div class="post-metadata">

### Author: ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)
#### Post date: [October 26, 2023, 3:43pm UTC](https://forum.snapmaker.com/t/cura-support-temperature-is-not-right/33341/2 "2023-10-26T15:43:25Z")

</div>

[Edit]  
I see this is a double post. I’ll reply to [the original post](https://forum.snapmaker.com/t/cura-temperature-not-right/33350).