# Creality SpacePi X4 with Snapmaker U1

**URL:** <https://forum.snapmaker.com/t/creality-spacepi-x4-with-snapmaker-u1/41448>\
**Category:** U1 Toolchanger\
**Created:** [March 12, 2026, 3:32pm UTC](https://forum.snapmaker.com/t/creality-spacepi-x4-with-snapmaker-u1/41448 "2026-03-12T15:32:40Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![CrazyIvan](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@CrazyIvan](https://forum.snapmaker.com/u/CrazyIvan)\
**Post date:** [March 12, 2026, 6:42pm UTC](https://forum.snapmaker.com/t/creality-spacepi-x4-with-snapmaker-u1/41448/2 "2026-03-12T18:42:55Z")

</div>

If the SpacePi is only a drier and not an AMS, with four separate filament outputs, it should be easy enough to route the filaments to the U1’s feeders.

If it’s an AMS as well, see here: [Snapmaker Automatic Material Managment (S.A.M.M)](https://forum.snapmaker.com/t/snapmaker-automatic-material-managment-s-a-m-m/41246)

---

_[View the full topic](https://forum.snapmaker.com/t/creality-spacepi-x4-with-snapmaker-u1/41448)._