# Collection Of Guide Links **URL:** \ **Category:** Snapmaker2.0 Troubleshooting guides\ **Created:** [October 24, 2022, 9:52pm UTC](https://forum.snapmaker.com/t/collection-of-guide-links/27659 "2022-10-24T21:52:05Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\ **Post date:** [December 17, 2022, 5:58pm UTC](https://forum.snapmaker.com/t/collection-of-guide-links/27659/4 "2022-12-17T17:58:47Z")
Adding @Slynold’s guide for using the camera with lightburn. > [@Working camera capture with Lightburn](https://forum.snapmaker.com/t/working-camera-capture-with-lightburn/28397): > > Update 17.12.2022 I removed the OBS camera and added the step to install @Mayco s Snapmaker Lightburn Host. Update 16.12.2022 Hello all, as promised, here is a short tutorial on how to use the camera support of the Snapmaker Laser Module with Lightburn. First of all: I came up with this when I looked at how to calibrate the camera for Lightburn. Only static images are needed, and we can easily create that with the 10 Watt Laser Module. Actually, I’m a Linux person, but I made this stab wit… EDIT: Gonna sneak a new one of mine in, a bit of an extension to the Full Lightburn Control guide. Using Lightburn with the Rotary module; > [@Lightburn + Rotary Guide](https://forum.snapmaker.com/t/lightburn-rotary-guide/28542): > > This is going to be a quick guide on the settings/required modifications to use the rotary module with Lightburn. I am sorry, but it will require following the beginning of my full lightburn control guide. Mainly flashing the custom firmware (as of writing, make sure you’re on the latest 1.14.3 before loading the custom firmware and do NOT turn the machine off until it’s done). Follow along until the GCode header/footer section, for the rotary you only need M3 S0 in… EDIT2: Advanced guide to use Lightburn to FULLY control the rotary. > [@Full Control Lightburn + Rotary Guide](https://forum.snapmaker.com/t/full-control-lightburn-rotary-guide/28584): > > I will start out by saying, I do NOT recommend this. This was mostly for me to test could it be done. Since I’m writing this guide… guess it can! For those who want to try it anyway, I’ll layout how to do it, but be warned. This is an advanced process. It will require a lot of double-checks, a bit of initial setup for origins, and a bit more gcode editing (nothing hard though, and most can be done with a batch script if someone chose to write it). That being said, onward I guess! --- _[View the full topic](https://forum.snapmaker.com/t/collection-of-guide-links/27659)._