# CNC board tips?

**URL:** <https://forum.snapmaker.com/t/cnc-board-tips/31662>\
**Category:** Artisan (3-in-1)\
**Created:** [June 4, 2023, 7:10pm UTC](https://forum.snapmaker.com/t/cnc-board-tips/31662 "2023-06-04T19:10:35Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![ftoons](https://avatars.discourse-cdn.com/v4/letter/f/6de8d8/32.png) [@ftoons](https://forum.snapmaker.com/u/ftoons)\
**Post date:** [June 4, 2023, 8:44pm UTC](https://forum.snapmaker.com/t/cnc-board-tips/31662/2 "2023-06-04T20:44:33Z")

</div>

Hi Kevin,  
Not an expert opinion but advice I got from this forum:  
1- That piece of is made for cutting into it sometimes and would be changed every now and then. It is considered a consumable.  
2- I asked about the vacuum and got this reply. Haven’t bought one yet.  
[https://forum.snapmaker.com/t/cnc-vacuum-advice/31536/4?u=ftoons](https://forum.snapmaker.com/t/cnc-vacuum-advice/31536/4)

Hope this is helpful.

---

_[View the full topic](https://forum.snapmaker.com/t/cnc-board-tips/31662)._