# Carving signs with my 350

**URL:** <https://forum.snapmaker.com/t/carving-signs-with-my-350/20902>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [September 15, 2021, 5:57pm UTC](https://forum.snapmaker.com/t/carving-signs-with-my-350/20902 "2021-09-15T17:57:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KJW](https://avatars.discourse-cdn.com/v4/letter/k/e79b87/32.png) [@KJW](https://forum.snapmaker.com/u/KJW)\
**Post date:** [September 15, 2021, 5:57pm UTC](https://forum.snapmaker.com/t/carving-signs-with-my-350/20902/1 "2021-09-15T17:57:26Z")

</div>

Hi, I am Kenny, I need help getting started designing and carving signs on my 350. I am at at loss, I am certainly a novice. I thought I could find a starting point but have failed to do so. Can someone give me some help.

---

<div class="post-metadata">

**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\
**Post date:** [September 15, 2021, 6:08pm UTC](https://forum.snapmaker.com/t/carving-signs-with-my-350/20902/2 "2021-09-15T18:08:36Z")

</div>

Check out these threads:

> [@Interested in CNC Wisdom](https://forum.snapmaker.com/t/interested-in-cnc-wisdom/18727):
>
> Hi Everyone, I’m embarking on a project with an ambitious timeline. Right now I’ve got the laser module carving a path into oak plywood that I can cut out with my scroll saw and plunge router (pattern involves a circle and will need to be produced twice for desired thickness so I wanted exact lines) ([https://upload.wikimedia.org/wikipedia/commons/3/38/CBP\_Air\_and\_Marine\_Operations\_Emblem.png](https://upload.wikimedia.org/wikipedia/commons/3/38/CBP_Air_and_Marine_Operations_Emblem.png)) I am thinking of using the CNC module carve out the words at the top of the linked image patch (and ma…

> [@Some info on cnc tool changes and combo cnc/laser projects](https://forum.snapmaker.com/t/some-info-on-cnc-tool-changes-and-combo-cnc-laser-projects/14102):
>
> @brent113 asked me a few questions about my process for cnc & laser. It was in response to some of the pieces I’d posted in this thread: [Multi tool projects](https://forum.snapmaker.com/t/multi-tool-projects/9644) We thought it would probably be good to share some of my answers and methods and some tips. Hopefully it will be helpful. This information should probably be considered intermediate to advanced. At some point I may make a guide to using Fusion 360 with svg’s and creating tool paths, and also using Easel by Inventables, but this assumes you…

-S