# Carriage Tolerances - Unusable Over Distance \>75mm From Center

**URL:** <https://forum.snapmaker.com/t/carriage-tolerances-unusable-over-distance-75mm-from-center/10706>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [October 21, 2020, 3:15am UTC](https://forum.snapmaker.com/t/carriage-tolerances-unusable-over-distance-75mm-from-center/10706 "2020-10-21T03:15:18Z")\
**Posts on this page:** 1\
**Showing post:** 39

<div class="post-metadata">

**Author:** ![gupper\_grans](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/gupper_grans/32/7672_2.png) [@gupper\_grans](https://forum.snapmaker.com/u/gupper_grans)\
**Post date:** [October 23, 2020, 12:08pm UTC](https://forum.snapmaker.com/t/carriage-tolerances-unusable-over-distance-75mm-from-center/10706/39 "2020-10-23T12:08:09Z")

</div>

With all that frustration with bumping of linear modules and tolerance, I decided to CNC a new frame(mounting platform). I want to make shim parts with a bigger radius, it could help with flatness of mounting «beds». 16mm vs original 10mm.

I also want to make more connection points between frame and linear modules for vibration damping between them, so I added a few holes to design.

So i hope with a new frame and new linear module i can reach better results with my A350. Or not. I start thinking that it’s not possible to get good results with that machine.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/b/b6c42bdecde5b1bef828d73f0d2248757f56d88a.jpeg)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/3/34c7da6b9fd340930377adf3b818e8a23fa69574.jpeg)

---

_[View the full topic](https://forum.snapmaker.com/t/carriage-tolerances-unusable-over-distance-75mm-from-center/10706)._