# Can't get rid of stringing

**URL:** <https://forum.snapmaker.com/t/cant-get-rid-of-stringing/23413>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [January 9, 2022, 8:09pm UTC](https://forum.snapmaker.com/t/cant-get-rid-of-stringing/23413 "2022-01-09T20:09:31Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![FM1988](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/fm1988/32/16627_2.png) [@FM1988](https://forum.snapmaker.com/u/FM1988)\
**Post date:** [February 3, 2022, 9:32am UTC](https://forum.snapmaker.com/t/cant-get-rid-of-stringing/23413/3 "2022-02-03T09:32:06Z")

</div>

> [@Problem with stringing A150](https://forum.snapmaker.com/t/problem-with-stringing-a150/23476):
>
> Hi together, i have Snapmaker 2.0 - A150 since a few weeks. But I have some problems getting good print results especially with stringing. All prints were made with the “normal quality” profile in luban with layerheight 0,16mm. What I have done so far: Out of the Box my Extruder was under extruding, when extruding 100mm it only extruded 93mm of filament, so I adjusted the E Value (M92) need to change it from 212,21 steps/mm to 230 steps/mm. Adjusted the Retraction (Standard in Luban is 5…

sry this was the double post, because of spam filter, later this one got posted by an admin.

---

_[View the full topic](https://forum.snapmaker.com/t/cant-get-rid-of-stringing/23413)._