# Can't Eliminate Stringing

**URL:** <https://forum.snapmaker.com/t/cant-eliminate-stringing/15228>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [January 31, 2021, 3:41am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228 "2021-01-31T03:41:34Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![Blockmodule](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/blockmodule/32/11177_2.png) [@Blockmodule](https://forum.snapmaker.com/u/Blockmodule)\
**Post date:** [February 7, 2021, 5:48am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/16 "2021-02-07T05:48:52Z")

</div>

If you zoom in on the image and look closely, you can see that the nozzle hole is indeed large.  
What I notice is that the brass of the nozzle is deformed round around it.

Maybe you are using a very tight gap between the print sheet and the nozzle?

Even if the hole was a large one in the wrong place, I don’t think it would deform this much within a reel of filament.

You have just raised a clear image, so please check again if you are keeping the proper calibration distance.

> [@Bed Adhesion Issue](https://forum.snapmaker.com/t/bed-adhesion-issue/15468/4):
>
> Your head is too low to the bed.

 ![mk8](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/e/ec21c9ef2c63ff6adbd66e9ed209a0be18b969f1.jpeg)

---

_[View the full topic](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228)._
