# Can't Eliminate Stringing

**URL:** <https://forum.snapmaker.com/t/cant-eliminate-stringing/15228>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [January 31, 2021, 3:41am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228 "2021-01-31T03:41:34Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [January 31, 2021, 3:41am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/1 "2021-01-31T03:41:34Z")

</div>

I’ve gone through all the calibration settings on the teaching tech site: [Teaching Tech 3D Printer Calibration](https://teachingtechyt.github.io/calibration.html#retraction)  
But I absolutely can’t eliminate the stringing completely. I’ve gotten it down to either a very fine spider-web or some slightly sharper bits that stick out the side. But I can’t get rid of them. If I try to print anything with detail the entire side is covered in webbing. I’ve tried 2 different filaments, one that gave me no trouble on a different printer. Whatever is causing the stringing is specific to the snapmaker2. My preferred slicer is S3D, but these tests are done with Gcode generated by the site linked above.  
This is on an A350, with enclosure. My best results have been at 190 degrees, retraction distance ~3mm, speed 90mm/sec, 0.5 zhop.

 ![PXL_20210131_032319797.MP](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/d/debc21ccdb840342ae7b1bfa52d16adae807a24f.jpeg) ![PXL_20210131_032335094.MP](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/e/e132906f4d563217dae90f9d475b468bf1c436d6.jpeg)

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [January 31, 2021, 1:07pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/2 "2021-01-31T13:07:36Z")

</div>

I print petg with 1mm @ 45mm/s Retract without Z-Hop.  
I guess 90mm/s is way too high, I don’t know the max speed but I guess there could be some filament grinding or slipping…

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [January 31, 2021, 5:02pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/3 "2021-01-31T17:02:47Z")

</div>

I’ve tried everything from 10mm on up. Speed doesn’t seem to be much of a factor in the webbing.

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [February 5, 2021, 5:10pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/4 "2021-02-05T17:10:58Z")

</div>

This is ridiculous. doesn’t matter what settings I use on this printer, the stringing will not go away. Is this problem just particularly bad for the Snapmaker? It was never this bad on my other printer. These settings have gotten the webbing as fine as it is, but it will just -NOT- go away completely.

 ![Screenshot 2021-02-05 090949](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/f/fd20edbb72dc234b19a180632d974a709c83a320.png)

 ![PXL_20210205_170149471.MP](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/d/d78e1f9ba394a369e04a5ea3fc909bac0288790d.jpeg)

---

<div class="post-metadata">

**Author:** ![stefix](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/stefix/32/8616_2.png) [@stefix](https://forum.snapmaker.com/u/stefix)\
**Post date:** [February 5, 2021, 5:19pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/5 "2021-02-05T17:19:18Z")

</div>

Retraktion 5,4m!!! / minute ??? Thats a little bit to much I think 😉

---

<div class="post-metadata">

**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\
**Post date:** [February 5, 2021, 8:07pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/6 "2021-02-05T20:07:10Z")

</div>

is your filament wet mate

I have some stringing but that is really bad

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [February 6, 2021, 1:34am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/7 "2021-02-06T01:34:48Z")

</div>

No. Filament is dry. Heck this is southern nevada, it takes special effort to make it wet.

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [February 6, 2021, 1:35am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/8 "2021-02-06T01:35:58Z")

</div>

I’ve tried it all over the place speed wise. That’s just where is currently at because it’s where the stringing was the thinnest

---

<div class="post-metadata">

**Author:** ![thehouse](https://avatars.discourse-cdn.com/v4/letter/t/7c8e57/32.png) [@thehouse](https://forum.snapmaker.com/u/thehouse)\
**Post date:** [February 6, 2021, 4:27am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/9 "2021-02-06T04:27:33Z")

</div>

I had a similar issue. Got really frustrated and pulled off the print head to check nozzle. the SM 2 came with a spare so compared it. Saw that the brass tip was worn down so I swapped them out. Has been much better since. Not for sure it’ll help, but wouldn’t hurt to check.

 ![20210128_013650](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/d/d6cd83e65067d1579cada35385a988138e5fd478.jpeg)

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [February 6, 2021, 4:28am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/10 "2021-02-06T04:28:37Z")

</div>

I guess I can check. My SN is still brand new. Thanks for the suggestion

---

<div class="post-metadata">

**Author:** ![Blockmodule](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/blockmodule/32/11177_2.png) [@Blockmodule](https://forum.snapmaker.com/u/Blockmodule)\
**Post date:** [February 6, 2021, 5:58am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/11 "2021-02-06T05:58:30Z")

</div>

Hello, thehouse!

Do you know what type of filament you used and for how many hours to get that nozzle looking like that?

I feel that 0.4mm compares to about 0.8mm in size:(

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [February 6, 2021, 2:21pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/12 "2021-02-06T14:21:25Z")

</div>

@ArrMiHardies, there were some nozzles which where falsely shipped, they looked like the picture of @thehouse.  
But this phenomen was a early backer issue.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [February 6, 2021, 2:23pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/13 "2021-02-06T14:23:27Z")

</div>

Is this your support left and right to your model? - looks quiet thin…

---

<div class="post-metadata">

**Author:** ![thehouse](https://avatars.discourse-cdn.com/v4/letter/t/7c8e57/32.png) [@thehouse](https://forum.snapmaker.com/u/thehouse)\
**Post date:** [February 6, 2021, 11:12pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/14 "2021-02-06T23:12:34Z")

</div>

Hey @Blockmodule! I dont know how to get an actual hour count, but I got my A350 end of December, so that wear was all from the stock SM PLA spool that came with it and I still have some left. One of the things I tried was buying a spool of Prusament and Overture PLAs which all had similar results, that’s what made me check the nozzle.

---

<div class="post-metadata">

**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\
**Post date:** [February 7, 2021, 1:36am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/15 "2021-02-07T01:36:42Z")

</div>

Prusament \> overture by a billion fold

the snapmaker black PLA filament is goofy as can be, some people have it permanently fuse to their print sheet, some people have unremovable clogs, some people have thier extruder shred it to bits. it wouldnt surprise me if it goofed up your nozzle.

invest in a couple more hotends, then buy a box of MK8 brass nozzles (.4mm) on amazon for next to nothing to keep them going.

---

<div class="post-metadata">

**Author:** ![Blockmodule](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/blockmodule/32/11177_2.png) [@Blockmodule](https://forum.snapmaker.com/u/Blockmodule)\
**Post date:** [February 7, 2021, 5:48am UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/16 "2021-02-07T05:48:52Z")

</div>

If you zoom in on the image and look closely, you can see that the nozzle hole is indeed large.  
What I notice is that the brass of the nozzle is deformed round around it.

Maybe you are using a very tight gap between the print sheet and the nozzle?

Even if the hole was a large one in the wrong place, I don’t think it would deform this much within a reel of filament.

You have just raised a clear image, so please check again if you are keeping the proper calibration distance.

> [@Bed Adhesion Issue](https://forum.snapmaker.com/t/bed-adhesion-issue/15468/4):
>
> Your head is too low to the bed.

 ![mk8](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/e/ec21c9ef2c63ff6adbd66e9ed209a0be18b969f1.jpeg)

---

<div class="post-metadata">

**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\
**Post date:** [February 7, 2021, 7:37pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/17 "2021-02-07T19:37:10Z")

</div>

yeah looks like it crashed and mushroomed out

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [February 7, 2021, 7:54pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/18 "2021-02-07T19:54:42Z")

</div>

I just checked my hot nozzle. I don’t think that it’s the problem. I haven’t even gone through 0.5k of any kind of filament yet. But I’m going to swap it out anyways. I know it bottomed out pretty bad courtesy of the gcode from the Teaching Tech site, so it can’t hurt, right? In this photo, the new one is on the left, used on the right.

 ![PXL_20210207_194743615.MP](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/a/ac81008adfd13a934cc4d86e2e3c0e9f6f6b8f19.jpeg)

---

<div class="post-metadata">

**Author:** ![ArrMiHardies](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/arrmihardies/32/10033_2.png) [@ArrMiHardies](https://forum.snapmaker.com/u/ArrMiHardies)\
**Post date:** [February 7, 2021, 8:16pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/19 "2021-02-07T20:16:40Z")

</div>

It was pre-supported in the stl. Yeah, they are thin, but they worked well and did their job and used a TON less filament than the supports S3D wanted to make

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [February 8, 2021, 7:26pm UTC](https://forum.snapmaker.com/t/cant-eliminate-stringing/15228/20 "2021-02-08T19:26:37Z")

</div>

Hey, I completely forgot, have a look at this thread, good luck!

> [@Whats wrong with this picture - printre hot ends](https://forum.snapmaker.com/t/whats-wrong-with-this-picture-printre-hot-ends/7757):
>
> So was swapping hot ends to a different nozzle diameter and noticed the thermistor bead is just loose and in poor contact with the heat block. Same on all the other extra hotends I bought. Surprising given the quality in the rest of the machine. So Id recommend some epoxy or high temp stud thread lock…
