# Camera preview and G-code always in top right quadrant instead of middle

**URL:** <https://forum.snapmaker.com/t/camera-preview-and-g-code-always-in-top-right-quadrant-instead-of-middle/7345>\
**Category:** Snapmaker Luban\
**Created:** [June 28, 2020, 2:23pm UTC](https://forum.snapmaker.com/t/camera-preview-and-g-code-always-in-top-right-quadrant-instead-of-middle/7345 "2020-06-28T14:23:11Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![Nazar](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nazar/32/6348_2.png) [@Nazar](https://forum.snapmaker.com/u/Nazar)\
**Post date:** [October 18, 2020, 3:05am UTC](https://forum.snapmaker.com/t/camera-preview-and-g-code-always-in-top-right-quadrant-instead-of-middle/7345/18 "2020-10-18T03:05:49Z")

</div>

hi, thought i would give a follow up , the problem was not me but the software, found out by starting another thread.  
@albutch hit the nail on the head (gave the right info) but being completely new to this - i didn’t quite understand what he was saying 😃 totally my fault, as i thought it was another reason. big thankyou to albutch - he was able to cut through what i described to get to the actual problem.

apparently (haven’t tried it yet) using camera capture the origin gets lost when you “send to device via wifi” but if you run it via the computer it works, (rather defeats the purpose)  
going forward, i will use albutch suggestion until they fix the problem

if interested like @Galduron 1 st post - to give your support to the updates he suggests (it must have taken a bit to put it together 😃

> [@FEATURE REQUEST: Laser settings](https://forum.snapmaker.com/t/feature-request-laser-settings/9411):
>
> Hi there, my first post on the Forum, I would like to request a few features for laser engraving/cutting. First of all, when engraving Greyscale, there are 2 modes : Dot mode and Line mode. When choosing Dot mode, the scanning is done vertically (Y-axis is moving back and forth per line) and when choosing Line mode, the scanning is done horizontally (X-axis is moving back and forth per line) I noticed that B&W mode has horizontal, vertical and diagonal scanning optional. Could you please …

---

_[View the full topic](https://forum.snapmaker.com/t/camera-preview-and-g-code-always-in-top-right-quadrant-instead-of-middle/7345)._