# Calibration pushing deep into buildplate

**URL:** <https://forum.snapmaker.com/t/calibration-pushing-deep-into-buildplate/4972>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [January 17, 2020, 3:55pm UTC](https://forum.snapmaker.com/t/calibration-pushing-deep-into-buildplate/4972 "2020-01-17T15:55:15Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![Mika](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mika/32/3693_2.png) [@Mika](https://forum.snapmaker.com/u/Mika)\
**Post date:** [January 23, 2020, 4:20am UTC](https://forum.snapmaker.com/t/calibration-pushing-deep-into-buildplate/4972/16 "2020-01-23T04:20:15Z")

</div>

It’s pretty messed up, i’ve got a thread going here [Snapmaker has the wrong positioning](http://forum.snapmaker.com/t/snapmaker-has-the-wrong-positioning/5040)

But so far really bad first impression, the snapmaker 1 worked amazingly out of box and I was setup and printing within a few hours of it being put together, this one I’ve spent 5 hours debugging already and nothing.

---

_[View the full topic](https://forum.snapmaker.com/t/calibration-pushing-deep-into-buildplate/4972)._