# Bed Temperatures output

**URL:** <https://forum.snapmaker.com/t/bed-temperatures-output/38511>\
**Category:** Artisan (3-in-1)\
**Created:** [December 22, 2024, 8:56am UTC](https://forum.snapmaker.com/t/bed-temperatures-output/38511 "2024-12-22T08:56:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![obayviz](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/obayviz/32/28186_2.png) [@obayviz](https://forum.snapmaker.com/u/obayviz)\
**Post date:** [December 22, 2024, 8:56am UTC](https://forum.snapmaker.com/t/bed-temperatures-output/38511/1 "2024-12-22T08:56:27Z")

</div>

Machine: Snapmaker Artisan  
Raspberry Pi 3b / Octoprint

Hello Folks,

Machine: Snapmaker Artisan

The bed temperature display in Octoprint does not receive any information from the machine. This is because the Artisan does not have a uniform bed temperature, but is divided into two areas. The inner and outer zones. I cannot display B0 and B1 in the web interface. It is displayed in the app.

Is there a way to display these values in the web interface?

Can I rename the designations B0 to “Bed inside” and B1 to “Entire bed”?

I am also looking for a working code to display the bed leveling in the browser, the standard codes probably also fail at B0/B1 I think. I can’t get it to work so far.

What could the “M” temperature output mean?

Any advice?

 ![IMG_9715](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/9/0/90ab6a4030fa521d7a6a57d1b45bc91a3fec4236.jpeg)

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [December 22, 2024, 2:28pm UTC](https://forum.snapmaker.com/t/bed-temperatures-output/38511/2 "2024-12-22T14:28:01Z")

</div>

Here you go:

> [@Octoprint Not Displaying "Actual Bed Temp"](https://forum.snapmaker.com/t/octoprint-not-displaying-actual-bed-temp/38310/4):
>
> So Top Temp can work. You need to create special reg ex’s to show the temp, but it doesn’t affect the temperature graph. This plugin does the trick of fixing the temperature graph with minimal configuration: [OctoPrint-PlotlyTempGraph](https://plugins.octoprint.org/plugins/plotlytempgraph/)

---

<div class="post-metadata">

**Author:** ![obayviz](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/obayviz/32/28186_2.png) [@obayviz](https://forum.snapmaker.com/u/obayviz)\
**Post date:** [December 25, 2024, 9:29am UTC](https://forum.snapmaker.com/t/bed-temperatures-output/38511/3 "2024-12-25T09:29:48Z")

</div>

Thank you very much! Is there a way to customize the plugin? Can I change B0 to Bed inside as example?