# Bed is not level

**URL:** <https://forum.snapmaker.com/t/bed-is-not-level/12985>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 20, 2020, 3:39am UTC](https://forum.snapmaker.com/t/bed-is-not-level/12985 "2020-12-20T03:39:24Z")\
**Posts on this page:** 1\
**Showing post:** 32

<div class="post-metadata">

**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\
**Post date:** [January 9, 2021, 7:53pm UTC](https://forum.snapmaker.com/t/bed-is-not-level/12985/32 "2021-01-09T19:53:18Z")

</div>

Brent provided this information to me recently due to a similar discovery

[Carriage Tolerances - Unusable Over Distance \>75mm From Center - Snapmaker 2.0 - Snapmaker: where creation happens](https://forum.snapmaker.com/t/carriage-tolerances-unusable-over-distance-75mm-from-center/10706/34)

This method of tramming to ensure its even

I personally used a level as my spacer because its the only thing i had that was going to be straight and substantial enough.

---

_[View the full topic](https://forum.snapmaker.com/t/bed-is-not-level/12985)._