# Basic PETG Question

**URL:** <https://forum.snapmaker.com/t/basic-petg-question/40859>\
**Category:** U1 Toolchanger\
**Created:** [January 7, 2026, 1:54am UTC](https://forum.snapmaker.com/t/basic-petg-question/40859 "2026-01-07T01:54:02Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![gnubie](https://avatars.discourse-cdn.com/v4/letter/g/ba9def/32.png) [@gnubie](https://forum.snapmaker.com/u/gnubie)\
**Post date:** [March 8, 2026, 5:28pm UTC](https://forum.snapmaker.com/t/basic-petg-question/40859/21 "2026-03-08T17:28:05Z")

</div>

I use the basic setting in the Snapmaker orca for the PETG I am using. The only other thing is use is vision miner for a bed adhesive / release agent for the textured PEI bed that came with the U1. This is not needed, but I use Bambu Lab high flow PETG which can over bond to the build plate.

I have not had the bed default to 0c for temp as described above, but have been printing since the beginning of January.

So for the settings, Generic PETG-HF for the filament, 0.20 standard and 0.12 High Quality for layer height.

[Previous page](https://forum.snapmaker.com/t/basic-petg-question/40859.md?page=1)