# Axis Movement Issues

**URL:** <https://forum.snapmaker.com/t/axis-movement-issues/26661>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [July 8, 2022, 6:14pm UTC](https://forum.snapmaker.com/t/axis-movement-issues/26661 "2022-07-08T18:14:48Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [July 8, 2022, 8:18pm UTC](https://forum.snapmaker.com/t/axis-movement-issues/26661/5 "2022-07-08T20:18:02Z")

</div>

Double check that the linear modules are in the [right locations](https://forum.snapmaker.com/t/axes-only-move-when-i-switch-y-and-z-axis-on-the-controller/26557). The Z axises module(s) have the 8mm lead label, and the X and Y have the 20mm label. The controller refuses to move if the modules are installed in the wrong locations.

If the print head is pushing into the build plate, check the [proximity sensor](https://forum.snapmaker.com/t/need-help-with-proximity-sensor-adjustment-alignment/24690).

---

_[View the full topic](https://forum.snapmaker.com/t/axis-movement-issues/26661)._
