# Auto leveling with Luban **URL:** \ **Category:** Snapmaker Luban\ **Created:** [October 10, 2020, 9:19am UTC](https://forum.snapmaker.com/t/auto-leveling-with-luban/10302 "2020-10-10T09:19:05Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![michaelapp](https://avatars.discourse-cdn.com/v4/letter/m/96bed5/32.png) [@michaelapp](https://forum.snapmaker.com/u/michaelapp)\ **Post date:** [October 10, 2020, 9:19am UTC](https://forum.snapmaker.com/t/auto-leveling-with-luban/10302/1 "2020-10-10T09:19:05Z")
Hello togehter, i have a issue with my touchpad and i hav open a case. I can use the A250 with USB and Luban. But is it possible to make the auto leveling with Luban? Regards Michael ---
**Author:** ![VendettaG](https://avatars.discourse-cdn.com/v4/letter/v/b5a626/32.png) [@VendettaG](https://forum.snapmaker.com/u/VendettaG)\ **Post date:** [December 24, 2020, 9:08am UTC](https://forum.snapmaker.com/t/auto-leveling-with-luban/10302/2 "2020-12-24T09:08:33Z")
I would like to know the answer to this question! I was able to auto level when setting up the device, but now there is no option on the touchpad, and I can’t find the settings. ---
**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\ **Post date:** [December 24, 2020, 2:26pm UTC](https://forum.snapmaker.com/t/auto-leveling-with-luban/10302/3 "2020-12-24T14:26:56Z")
there is a way to do so via g-code, i would like to find the process myself because you can assign a larger grid. i know its on the forums someplace. ---
**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\ **Post date:** [December 24, 2020, 2:27pm UTC](https://forum.snapmaker.com/t/auto-leveling-with-luban/10302/4 "2020-12-24T14:27:32Z")
If you swipe the screen to the left youll see more menus, including calibration, from the home screen (not during a print) ---
**Author:** ![scha7571](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@scha7571](https://forum.snapmaker.com/u/scha7571)\ **Post date:** [January 1, 2023, 4:00am UTC](https://forum.snapmaker.com/t/auto-leveling-with-luban/10302/5 "2023-01-01T04:00:12Z")
From the Luban 4.4.0 program, you can connect to your device via a USB to Mini USB cable. Then connect from the workspace using a serial port. (you can download the drivers from Snapmaker) Then you can use G1029 G1029 P3 (3x3 matrix) G1029 A Starts automatic probing 3x3 matrix Manually adjust Z axis height from the options on the right in the workspace G1029 S saves the setting G91 will set the Z axis leveling relative to the leveling data Bing bang boom. here’s a link [https://snapmaker.github.io/Documentation/gcode/G1029-abl](https://snapmaker.github.io/Documentation/gcode/G1029-abl)