# Artisan Gcode for lightburn

**URL:** <https://forum.snapmaker.com/t/artisan-gcode-for-lightburn/33694>\
**Category:** Artisan (3-in-1)\
**Created:** [November 19, 2023, 3:13pm UTC](https://forum.snapmaker.com/t/artisan-gcode-for-lightburn/33694 "2023-11-19T15:13:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Savoie](https://avatars.discourse-cdn.com/v4/letter/s/a587f6/32.png) [@Savoie](https://forum.snapmaker.com/u/Savoie)\
**Post date:** [November 20, 2023, 8:36pm UTC](https://forum.snapmaker.com/t/artisan-gcode-for-lightburn/33694/2 "2023-11-20T20:36:34Z")

</div>

same topic here: [https://forum.snapmaker.com/t/turn-on-air-purifier-at-programm-end/33579/2](https://forum.snapmaker.com/t/turn-on-air-purifier-at-programm-end/33579/2)

---

_[View the full topic](https://forum.snapmaker.com/t/artisan-gcode-for-lightburn/33694)._