# Artisan CNC ignoring speed from Fusion 360 file as well as stop action

**URL:** <https://forum.snapmaker.com/t/artisan-cnc-ignoring-speed-from-fusion-360-file-as-well-as-stop-action/32624>\
**Category:** Artisan (3-in-1)\
**Created:** [August 22, 2023, 6:46pm UTC](https://forum.snapmaker.com/t/artisan-cnc-ignoring-speed-from-fusion-360-file-as-well-as-stop-action/32624 "2023-08-22T18:46:40Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![nweolu](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nweolu/32/23079_2.png) [@nweolu](https://forum.snapmaker.com/u/nweolu)\
**Post date:** [August 31, 2023, 9:41pm UTC](https://forum.snapmaker.com/t/artisan-cnc-ignoring-speed-from-fusion-360-file-as-well-as-stop-action/32624/6 "2023-08-31T21:41:55Z")

</div>

It might be indeed the issue with free version of the Fusion360, like TheBum suggested.

Check out this thread - [Available Now: New post-processor, tool library, machine configurations, for Fusion 360](https://forum.snapmaker.com/t/available-now-new-post-processor-tool-library-machine-configurations-for-fusion-360/24955)

It has details about the issue and a workaround described in details.

You can post the cnc file here, so members can take a look and verify the fusion output. If you not familiar with gcode.

---

_[View the full topic](https://forum.snapmaker.com/t/artisan-cnc-ignoring-speed-from-fusion-360-file-as-well-as-stop-action/32624)._