# Artisan can’t prepare print

**URL:** <https://forum.snapmaker.com/t/artisan-can-t-prepare-print/38014>\
**Category:** Artisan (3-in-1)\
**Created:** [October 27, 2024, 10:44am UTC](https://forum.snapmaker.com/t/artisan-can-t-prepare-print/38014 "2024-10-27T10:44:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MirekM](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@MirekM](https://forum.snapmaker.com/u/MirekM)\
**Post date:** [October 27, 2024, 10:44am UTC](https://forum.snapmaker.com/t/artisan-can-t-prepare-print/38014/1 "2024-10-27T10:44:00Z")

</div>

Hi,  
My artisan stopped. It can’t prepare prints. Just like on picture - it’s preparing print and stopped on different values. Tested of Cura and Luban. The same effect.

 ![IMG_5107](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/1/6/16ded0904b0751d246f5200a024fa4eaaacb847c.jpeg)

Yesterday with no problems. No firmware was installed and the newest is onboard. And deleted some prints from printer to be sure there is a free memory (how to check status on printer free space?) What is going on?  
mm

---

<div class="post-metadata">

**Author:** ![MirekM](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@MirekM](https://forum.snapmaker.com/u/MirekM)\
**Post date:** [October 27, 2024, 11:19am UTC](https://forum.snapmaker.com/t/artisan-can-t-prepare-print/38014/2 "2024-10-27T11:19:48Z")

</div>

Problem solved. Probably WiFi connection on the limit was the problem. Moved computer little closer and now I can work again 🙂  
mm