# Artisan and Lightburn/Fusion 360

**URL:** <https://forum.snapmaker.com/t/artisan-and-lightburn-fusion-360/32230>\
**Category:** Artisan (3-in-1)\
**Tags:** Laser\
**Created:** [July 21, 2023, 12:31am UTC](https://forum.snapmaker.com/t/artisan-and-lightburn-fusion-360/32230 "2023-07-21T00:31:19Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![NoLuck](https://avatars.discourse-cdn.com/v4/letter/n/898d66/32.png) [@NoLuck](https://forum.snapmaker.com/u/NoLuck)\
**Post date:** [July 21, 2023, 12:31am UTC](https://forum.snapmaker.com/t/artisan-and-lightburn-fusion-360/32230/1 "2023-07-21T00:31:19Z")

</div>

Is anyone having full success using Fusion 360 or Lightburn to generate your G code for the laser then importing it through Luban? I am running into issues with Lightburn. The laser is not getting up to speed. I do not believe it is getting over 2500-3000 mm/min. Also, I do not think the Overscanning is working correctly. I have not fired up Fusion yet though.