# Área size láser with quick wap

**URL:** <https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 7, 2024, 10:32am UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367 "2024-12-07T10:32:55Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![MarkJ](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/markj/32/29732_2.png) [@MarkJ](https://forum.snapmaker.com/u/MarkJ)\
**Post date:** [December 7, 2024, 1:59pm UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367/5 "2024-12-07T13:59:39Z")

</div>

As far I’m concerned, a Luban bug. Software should compensate and let you know when you are outside the build parameters. See [Strange printing as Y axis approaches its max limit - #2 by xchrisd](https://forum.snapmaker.com/t/strange-printing-as-y-axis-approaches-its-max-limit/38087/2). Snapmaker is aware of the problem. I don’t know if they will address it or not.

---

_[View the full topic](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367)._