# Área size láser with quick wap

**URL:** https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367
**Category:** Snapmaker 2.0 (3-in-1)
**Created:** [December 7, 2024, 10:32am UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367 "2024-12-07T10:32:55Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![daniel89fg](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/daniel89fg/32/27546_2.png) [@daniel89fg](https://forum.snapmaker.com/u/daniel89fg)
#### Post date: [December 7, 2024, 10:32am UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367/1 "2024-12-07T10:32:55Z")

</div>

Hello. I have my Snapmaker 2.0 350T printer with the quick change kit (quick wap). I have it configured like this in Luban. When adding a new laser project in Luban it tells me that the maximum measurements are 350mm high by 320mm wide. The problem is that the height is not correct, when I put a piece of wood 350mm high, when it reaches 335mm high I finished, leaving the design badly cut. Any idea why this happens? Am I doing something wrong? or does Luban have a bug in the default configuration?

 ![17335675432485962914647176138645](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/8/5/8548b739a47a9c7e7e4a597f84b404f5819d7bda.jpeg)

---

<div class="post-metadata">

### Author: ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)
#### Post date: [December 7, 2024, 11:13am UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367/2 "2024-12-07T11:13:27Z")

</div>

The quick swap kit reduces the build volume - according to the shop page down to 320 x 335 x 315 mm. So your 335 mm are consistent with that. You may be able to cheat a few more mm out of the machine - read [this](https://forum.snapmaker.com/t/maximum-y-position-347mm/26373) thread about how to change the work coordinates.

---

<div class="post-metadata">

### Author: ![Boxkite](https://avatars.discourse-cdn.com/v4/letter/b/df705f/32.png) [@Boxkite](https://forum.snapmaker.com/u/Boxkite)
#### Post date: [December 7, 2024, 11:45am UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367/3 "2024-12-07T11:45:17Z")

</div>

Have you only changed the settings in Luban? You need to change the settings on the touch screen on the machine also.

---

<div class="post-metadata">

### Author: ![daniel89fg](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/daniel89fg/32/27546_2.png) [@daniel89fg](https://forum.snapmaker.com/u/daniel89fg)
#### Post date: [December 7, 2024, 1:13pm UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367/4 "2024-12-07T13:13:09Z")

</div>

I have changed the settings on the machine and in Luban. What happens is that when creating a new laser document in Luban it says 350x332mm, and I understand that it should say 335x320mm. So I don’t know if it’s a bug in Luban or if I should do something?

---

<div class="post-metadata">

### Author: ![MarkJ](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/markj/32/29732_2.png) [@MarkJ](https://forum.snapmaker.com/u/MarkJ)
#### Post date: [December 7, 2024, 1:59pm UTC](https://forum.snapmaker.com/t/area-size-laser-with-quick-wap/38367/5 "2024-12-07T13:59:39Z")

</div>

As far I’m concerned, a Luban bug. Software should compensate and let you know when you are outside the build parameters. See [Strange printing as Y axis approaches its max limit - #2 by xchrisd](https://forum.snapmaker.com/t/strange-printing-as-y-axis-approaches-its-max-limit/38087/2). Snapmaker is aware of the problem. I don’t know if they will address it or not.