# Appears Lightburn Does Work with snapmaker?

**URL:** <https://forum.snapmaker.com/t/appears-lightburn-does-work-with-snapmaker/36447>\
**Category:** Showcase & Prints\
**Created:** [July 24, 2024, 12:36am UTC](https://forum.snapmaker.com/t/appears-lightburn-does-work-with-snapmaker/36447 "2024-07-24T00:36:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cruz-in](https://avatars.discourse-cdn.com/v4/letter/c/67e7ee/32.png) [@Cruz-in](https://forum.snapmaker.com/u/Cruz-in)\
**Post date:** [July 24, 2024, 12:36am UTC](https://forum.snapmaker.com/t/appears-lightburn-does-work-with-snapmaker/36447/1 "2024-07-24T00:36:15Z")

</div>

> **[Snapmaker 2.0 non-fire issue?](https://forum.lightburnsoftware.com/t/snapmaker-2-0-non-fire-issue/128830)**
>
> Hi Snapmaker users, We’ve seen a couple recent Support tickets come in with 2.0 users claiming that motion control works, but the laser does not fire. We’ve seen this in the past If you’re experiencing this with the recent 1.5.00 or 1.5.01...

---

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [July 24, 2024, 8:39am UTC](https://forum.snapmaker.com/t/appears-lightburn-does-work-with-snapmaker/36447/3 "2024-07-24T08:39:40Z")

</div>

It does. Use the forum search, there are very good posts and tutorials about how to connect Lightburn with Snapmaker.

---

<div class="post-metadata">

**Author:** ![chogardjr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/chogardjr/32/24199_2.png) [@chogardjr](https://forum.snapmaker.com/u/chogardjr)\
**Post date:** [July 24, 2024, 6:18pm UTC](https://forum.snapmaker.com/t/appears-lightburn-does-work-with-snapmaker/36447/4 "2024-07-24T18:18:06Z")

</div>

[The machine profiles needed for Lightburn are on this Wiki page](https://wiki.snapmaker.com/en/general/manual/use_ray_with_lightburn_guide)  
[https://wiki.snapmaker.com/en/general/manual/use\_ray\_with\_lightburn\_guide](https://wiki.snapmaker.com/en/general/manual/use_ray_with_lightburn_guide)

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://forum.snapmaker.com/u/TheBum)\
**Post date:** [July 25, 2024, 2:52am UTC](https://forum.snapmaker.com/t/appears-lightburn-does-work-with-snapmaker/36447/5 "2024-07-25T02:52:01Z")

</div>

And you can always export the tool path file and upload it to the Snapmaker, or run it with Luban.