# About the Update - U1 Toolchanger

**URL:** <https://forum.snapmaker.com/t/about-the-update-u1-toolchanger/40323>\
**Category:** Update - U1 Toolchanger\
**Created:** [November 15, 2025, 6:41am UTC](https://forum.snapmaker.com/t/about-the-update-u1-toolchanger/40323 "2025-11-15T06:41:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Post date:** [November 15, 2025, 6:41am UTC](https://forum.snapmaker.com/t/about-the-update-u1-toolchanger/40323/1 "2025-11-15T06:41:58Z")

</div>

Get the latest official updates.

This section is for posting U1-related updates and user guides, including: KS updates, user manuals, hardware/software release notes.

---

<div class="post-metadata">

**Author:** ![Kaese666](https://avatars.discourse-cdn.com/v4/letter/k/91b2a8/32.png) [@Kaese666](https://forum.snapmaker.com/u/Kaese666)\
**Post date:** [January 27, 2026, 5:43pm UTC](https://forum.snapmaker.com/t/about-the-update-u1-toolchanger/40323/2 "2026-01-27T17:43:01Z")

</div>

## Firmware Update 1.1.0 Summary - January 26, 2026

This update brings functional improvements, bug fixes, and noticeable optimizations for print quality, usability, and reliability.

### 🧠 Intelligent Features & Diagnostics

- **Enhanced AI Defect Detection**  
The AI defect detection has been revised to significantly reduce **false alarms (false positives)**.

- **QR Codes in Error Messages**  
Certain error messages now include QR codes that directly link to official troubleshooting guides – faster problem resolution without searching.

### 🖨 Print Quality & Mechanics

- **Increased Z-Axis Motor Power**  
Z-axis motor current parameters have been adjusted, providing **more torque**. This resolves quality issues caused by weak Z-axis movements.

- **Selective Flow Calibration**  
Flow calibration can now be performed **individually per toolhead**. Previously calibrated toolheads do not need to be recalibrated → saves preparation time.

### 🧵 Filament & Material Handling

- **New RFID Filament Types Supported**  
Additional official RFID filaments are now recognized.

- **New Medium Sensitivity Level for Filament Tangle Detection**  
Tangle detection now offers a **medium sensitivity level** between “too sensitive” and “too slow.”

### 🌬 Cooling & Noise

- **Optimized Fan Control**  
The logic for cooling fans has been improved to reduce **unnecessary noise from inactive toolheads** during printing.

### ⏱ Print Time Calculation & Display

- **Accurate Print Time Display**  
The print time shown on the completion screen now reflects the **actual print time** , with pauses no longer included.

### 🖥 User Interface & Comfort

- **Improved Storage Space Display**  
Enhanced UI presentation for clearer management of available storage.

- **Auto-Refill Enabled by Default**  
After the firmware update, Auto-Refill is automatically enabled (can still be changed as needed).

### 🐞 Bug Fixes

- **Prevented Firmware Crashes** when the start G-code did not include a layer count.

- **Fixed Bug for Unexpected Nozzle Temperature Changes** during pre-extrusion.

---

<div class="post-metadata">

**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Post date:** [January 28, 2026, 3:18am UTC](https://forum.snapmaker.com/t/about-the-update-u1-toolchanger/40323/3 "2026-01-28T03:18:55Z")

</div>

Unpinned on January 28, 2026, 3:18am UTC


