# About the Snapmaker2.0 Troubleshooting guides

**URL:** <https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [October 14, 2017, 7:07am UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148 "2017-10-14T07:07:38Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rainie](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rainie/32/36_2.png) [@Rainie](https://forum.snapmaker.com/u/Rainie)\
**Post date:** [October 14, 2017, 7:07am UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148/1 "2017-10-14T07:07:38Z")

</div>

- Find solutions to your issues or share suggestions for improvement here! If your problem has been resolved, please add the appropriate tags and move your post to this section.

- Contact official support to log your issue. Support will reply to the email within two working days, and the user will receive the response\*\*.**[Support Ticket Form](https://snapmaker.formcrafts.com/support-ticket)**\*\*

- You can also try looking up solutions on your own in the **[WIKI](https://wiki.snapmaker.com/en/FAQ?open_in_browser=true)** or ask other forum users for help.

---

<div class="post-metadata">

**Author:** ![doug](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/doug/32/44_2.png) [@doug](https://forum.snapmaker.com/u/doug)\
**Post date:** [October 14, 2017, 7:28am UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148/2 "2017-10-14T07:28:43Z")

</div>

yeeha, almost time to say “Snapmakers, Start your Engines”  
😀🏎

---

<div class="post-metadata">

**Author:** ![Electric1](https://avatars.discourse-cdn.com/v4/letter/e/ce7236/32.png) [@Electric1](https://forum.snapmaker.com/u/Electric1)\
**Post date:** [June 30, 2019, 2:53pm UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148/4 "2019-06-30T14:53:01Z")

</div>

need help getting started with my 1st 3d print

---

<div class="post-metadata">

**Author:** ![doug](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/doug/32/44_2.png) [@doug](https://forum.snapmaker.com/u/doug)\
**Post date:** [June 30, 2019, 11:26pm UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148/5 "2019-06-30T23:26:40Z")

</div>

You need to detail your issue. I may I suggest you read the forum fro many great hints. Have you looked at [Snaplinks](http://forum.snapmaker.com/t/snaplinks-wiki/2108)

---

<div class="post-metadata">

**Author:** ![Rainie](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rainie/32/36_2.png) [@Rainie](https://forum.snapmaker.com/u/Rainie)\
**Post date:** [February 3, 2020, 7:54am UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148/6 "2020-02-03T07:54:58Z")

</div>



---

<div class="post-metadata">

**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Post date:** [November 18, 2025, 11:15am UTC](https://forum.snapmaker.com/t/about-the-snapmaker2-0-troubleshooting-guides/148/9 "2025-11-18T11:15:22Z")

</div>