# A350 CNC Recurring problem

**URL:** <https://forum.snapmaker.com/t/a350-cnc-recurring-problem/39835>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [August 13, 2025, 12:21pm UTC](https://forum.snapmaker.com/t/a350-cnc-recurring-problem/39835 "2025-08-13T12:21:55Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [August 14, 2025, 3:18pm UTC](https://forum.snapmaker.com/t/a350-cnc-recurring-problem/39835/11 "2025-08-14T15:18:39Z")

</div>

OK, does not sound like overheating is the likely cause…

Just to give more details on that anyhow, see here: [Linear Module defective and FW 1.8.0.0 Feedback - #6 by Edwin](https://forum.snapmaker.com/t/linear-module-defective-and-fw-1-8-0-0-feedback/6577/6) The silicon pad mentioned there was found missing by some SM2 owners, which caused overheating of the stepper drivers.

For me it sounds like you should reach out to Snapmaker support at this point.

---

_[View the full topic](https://forum.snapmaker.com/t/a350-cnc-recurring-problem/39835)._