# 3D printing with Luban

**URL:** <https://forum.snapmaker.com/t/3d-printing-with-luban/26930>\
**Category:** Original (3-in-1)\
**Created:** [August 5, 2022, 1:38pm UTC](https://forum.snapmaker.com/t/3d-printing-with-luban/26930 "2022-08-05T13:38:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MyrtleRx](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/myrtlerx/32/19137_2.png) [@MyrtleRx](https://forum.snapmaker.com/u/MyrtleRx)\
**Post date:** [August 5, 2022, 1:38pm UTC](https://forum.snapmaker.com/t/3d-printing-with-luban/26930/1 "2022-08-05T13:38:10Z")

</div>

When I use the 3D print head (that I really like) I slice my stl and try to put it into the workspace the program stops and says “please reset”. Luban needs a lot of improvement ! It’s ok for the other functions but 3D printing sucks. I just loaded the printer into Cura and printed the stl with no problem

---

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [August 5, 2022, 9:44pm UTC](https://forum.snapmaker.com/t/3d-printing-with-luban/26930/2 "2022-08-05T21:44:42Z")

</div>

Usually when I have slicing issues with Luban, it doesn’t work in Cura either. Luban uses an older version of CuraSlicer. I’ve downloaded some dodgy models from Thingiverse.