# 3D print doesn't completely seal the surface of the project

**URL:** <https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Tags:** 3D\_Models\
**Created:** [November 19, 2024, 2:11am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167 "2024-11-19T02:11:55Z")\
**Posts on this page:** 14\
**Page:** 2

<div class="post-metadata">

**Author:** ![wilsonrobertt](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wilsonrobertt](https://forum.snapmaker.com/u/wilsonrobertt)\
**Post date:** [November 19, 2024, 2:32am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/21 "2024-11-19T02:32:43Z")

</div>

we would need pictures to give a good guess 🙂

also the material you are using

---

<div class="post-metadata">

**Author:** ![MrsHilly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mrshilly/32/13548_2.png) [@MrsHilly](https://forum.snapmaker.com/u/MrsHilly)\
**Post date:** [November 19, 2024, 4:13am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/22 "2024-11-19T04:13:06Z")

</div>

![shark pic](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/5/9/596d40462c277d41e6096307cae532405e648f69.jpeg)

Product is from Amazon, 1.75mm PLA silk filament, the brand is 3DGenius. It’s from Shenzen China  
Someone said it doesn’t have inner wall support. I get that. but someone else had to have been successful at printing this, so how did they do it? I didn’t enlarge it, I printed as is.

China…

---

<div class="post-metadata">

**Author:** ![Mox0716](https://avatars.discourse-cdn.com/v4/letter/m/aeb1de/32.png) [@Mox0716](https://forum.snapmaker.com/u/Mox0716)\
**Post date:** [November 19, 2024, 4:34am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/23 "2024-11-19T04:34:18Z")

</div>

I’m having the same problem with infill not going into my prints. Don’t know how to fix it.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [November 19, 2024, 7:12pm UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/24 "2024-11-19T19:12:08Z")

</div>

Rebecca, please ask your question just once in the forum.  
You posted this picture at least in three topics and it would be clean and efficient if you ask only once per problem.  
You would get the same amount of answers but it would consume less time of the helping members…

Thank you for understanding.

---

<div class="post-metadata">

**Author:** ![wilsonrobertt](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wilsonrobertt](https://forum.snapmaker.com/u/wilsonrobertt)\
**Post date:** [November 19, 2024, 5:20am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/25 "2024-11-19T05:20:58Z")

</div>

so…no infill sounds like vase mode

 ![Screenshot 2024-11-18 at 9.17.44 PM](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/a/a/aa8c4cda565175c039c6bf457fc9aefe4f82e168.png)  
under Model Structure is Model Structure Type which needs to be set to Normal

---

<div class="post-metadata">

**Author:** ![wilsonrobertt](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wilsonrobertt](https://forum.snapmaker.com/u/wilsonrobertt)\
**Post date:** [November 19, 2024, 5:23am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/26 "2024-11-19T05:23:22Z")

</div>

i did a few of these sharks as well. they all had infill

also from the abuse given by grandkids in the tub the articulations would just snap off without infill. somehow grabbing it by the tail and swinging around over head just never occurred to me

---

<div class="post-metadata">

**Author:** ![MrsHilly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mrshilly/32/13548_2.png) [@MrsHilly](https://forum.snapmaker.com/u/MrsHilly)\
**Post date:** [November 19, 2024, 5:49am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/27 "2024-11-19T05:49:17Z")

</div>

🤣

Rebecca 🌻

---

<div class="post-metadata">

**Author:** ![MrsHilly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mrshilly/32/13548_2.png) [@MrsHilly](https://forum.snapmaker.com/u/MrsHilly)\
**Post date:** [November 19, 2024, 5:49am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/28 "2024-11-19T05:49:41Z")

</div>

Thank you! I shall try that 😊

Rebecca 🌻

---

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [November 19, 2024, 8:30pm UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/29 "2024-11-19T20:30:38Z")

</div>

I merged the different sub-threads into this one. Sorry if this might be a bit confusing here, but this way all information is sitting together, and the other threads remain specific to their headline.

---

<div class="post-metadata">

**Author:** ![MrsHilly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mrshilly/32/13548_2.png) [@MrsHilly](https://forum.snapmaker.com/u/MrsHilly)\
**Post date:** [November 20, 2024, 2:26am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/30 "2024-11-20T02:26:44Z")

</div>

Thanks!

Rebecca 🌻

---

<div class="post-metadata">

**Author:** ![MrsHilly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mrshilly/32/13548_2.png) [@MrsHilly](https://forum.snapmaker.com/u/MrsHilly)\
**Post date:** [November 20, 2024, 4:29am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/31 "2024-11-20T04:29:20Z")

</div>

Thank you

Rebecca 🌻

---

<div class="post-metadata">

**Author:** ![MrsHilly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mrshilly/32/13548_2.png) [@MrsHilly](https://forum.snapmaker.com/u/MrsHilly)\
**Post date:** [November 21, 2024, 12:14am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/32 "2024-11-21T00:14:04Z")

</div>

So, I did a thing… The head took 10 hours, and the body 14 with a work speed of 150%. not ideal, but the build came out great, and I owe it all to you! I want to say how grateful I am for your support, and I’m sorry if I messed up your clean forum by posting in more than one place. I didn’t think about the fact that I wasn’t messaging a specific person. I’m new, I am sorry! I’ll never do it again.

 ![beardie](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/5/4/54c44e3e1bd48ea9093617bb05eb340e5d79a3df.jpeg)

---

<div class="post-metadata">

**Author:** ![wilsonrobertt](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wilsonrobertt](https://forum.snapmaker.com/u/wilsonrobertt)\
**Post date:** [November 21, 2024, 2:36am UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/33 "2024-11-21T02:36:03Z")

</div>

now that’s a lizard!

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [November 21, 2024, 7:15pm UTC](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167/34 "2024-11-21T19:15:54Z")

</div>

Welcome to 3d printing, have fun!

[Previous page](https://forum.snapmaker.com/t/3d-print-doesnt-completely-seal-the-surface-of-the-project/38167.md?page=1)
