# 2.0 software firmware update wifi problems

**URL:** <https://forum.snapmaker.com/t/2-0-software-firmware-update-wifi-problems/33887>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 1, 2023, 2:15pm UTC](https://forum.snapmaker.com/t/2-0-software-firmware-update-wifi-problems/33887 "2023-12-01T14:15:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![usatransporter](https://avatars.discourse-cdn.com/v4/letter/u/a88e4f/32.png) [@usatransporter](https://forum.snapmaker.com/u/usatransporter)\
**Post date:** [December 1, 2023, 2:15pm UTC](https://forum.snapmaker.com/t/2-0-software-firmware-update-wifi-problems/33887/1 "2023-12-01T14:15:58Z")

</div>

I ran the software update and have been unable to connect to my a350T since.

From Workspace, I select connect for my machine via wifi and am shown 3 pop-ups in succession. The first shows “Connecting”, the second is “Screen Authorization Needed” and the final shows “Disconnected”.

I’ve since uninstalled and reinstalled the Luban 4.10.1 software and completed a firmware update to Snapmaker2\_V1.18.1\_20231103 for the laser module. I also completed a router reboot and confirmed both the computer and the Snapmaker are on the same network.

For now I will revert to using USB to transfer files and work directly from the Snapmaker screen.

 ![20231201_084957](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/2/a/2a4a190e673d23517a15ea3e96a7613449f08048.jpeg)

---

<div class="post-metadata">

**Author:** ![usatransporter](https://avatars.discourse-cdn.com/v4/letter/u/a88e4f/32.png) [@usatransporter](https://forum.snapmaker.com/u/usatransporter)\
**Post date:** [December 2, 2023, 11:24pm UTC](https://forum.snapmaker.com/t/2-0-software-firmware-update-wifi-problems/33887/2 "2023-12-02T23:24:52Z")

</div>

A quick update. I bought my A350T when the current software was 4.7.3. I can utilize any update up to 4.8.2. Once I install 4.9.X and beyond, the connect via Wi-Fi will go through the connection process and then disconnect.

---

<div class="post-metadata">

**Author:** ![MisterEarl](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MisterEarl](https://forum.snapmaker.com/u/MisterEarl)\
**Post date:** [December 6, 2023, 2:15am UTC](https://forum.snapmaker.com/t/2-0-software-firmware-update-wifi-problems/33887/3 "2023-12-06T02:15:54Z")

</div>

I’m having the same problems after upgrading to Luban 4.10.1, so you’re not alone. A power cycle sometimes helps, but not always.